Pistol Accessories

Special Pistol Shooting Needs

• SPOTTING SCOPE: NG 20x33 Mini Scope for 10m to 50m and beyond.
• ELECTRONIC TRAINER: The ultimate in training devices, the RIKA Home Trainer - your coach in a box.
• Issues dealing with SCUBA air safety.

  ---

  

  Hill High Pressure Hand Pump
  by Ernest H. Hill, Sheffield, England
  since 1841

  

  200 DIN fitting

  Hose

  Quick Release Coupling

  Both 200 DIN fitting and hose fitting included. The DIN fitting is suitable for adaptors of all sorts of 10m Match air pistols and rifles like STEYR, MORINI, FEINWERKBAU, ANSCHUTZ, HAMMERLI, WALTHER and many others. The hose fitting, with 1/8 BSP cone seat swivel connector, suits many QD fittings for FT and sporting pre-charged air rifles. An additional adapter may be needed to suit your gun and cylinder. Also available is the Quick Release Coupling which converts the 1/8" BSP standard pump outlet for rapid hose connection. Patented design which allows filling to 230 BAR. Features safety bleed valve, moisture trap and built-in pressure gauge. The only pump to feature a replaceable filter. ISO 9001 Quality Assured. 12 month warranty.

  Pump Specifications:
  LENGTH: 25"	WEIGHT: 7 lb
  MAXIMUM PRESSURE: 230 BAR (3300psi)

  
  
• Filling Air Cylinders with a Hand Pump
• Universal Dry Pac Kit Instructions
• Dry-Pac Instructions
• Pump Assembly and Maintenance
• Seal Replacement
• Replacing Micron Filter
• Retro Fit Dry-Pac Instructions
• Dry-Pac Test Results
  

  Micron Filter Kit

  Pressure Gauge

  Pump and parts (refill and replacement)

  Dry-Pac

   

  The Dry-Pac moisture removal system is another new ground-breaking innovation from Hill. This system answers any lingering concerns about moisture and hand pumps.
  
  Unique to the market, the Hill Dry-Pac system is a patented method of actively removing moisture utilizing a specially formulated medium and sintered filters. The Dry-Pac moisture elimination kit is available for late model Hill pumps.
  
  

  Note: If you purchase a Hill High Pressure Hand Pump and the Hill Dry-Pac system, we will include an extra package of Dry-Pac filter medium.
  

  

  
   

  
   

---




Air Pressure Gauge Screws into all pistol cylinders, as well as LG1P and LP10P rifle cylinders.

	CO2 Bleeder For draining cylinders or bleeding excess gas. Suits CO2 air pistols. Please call for ordering information.
	Filling adapters CO2 (left) or Air (right)

Pistol Air Cylinders These cylinders fit the LP10, LP50, and the LP2 (also old models LP1 and LP5). Your choice of silver, blue or gold. With built-in manometer.

K Valve to DIN Yoke



This is the easiest option for a shooter of a PCP airgun to fill from an existing SCUBA tank set up with a K valve. Fits in seconds.

 

 

 

---

1911-style Grip Suit LP5 or LP50. Ideal for Bullseye training.

	XS Pistol Grip For all Steyr air pistols. This is not a stock factory item - suits women and juniors with very small hands.   Please call for ordering information.
	FP Grip for LP5/LP50 Steyr Free Pistol grip modified to fit LP5 or LP50. While not ISSF legal, this has to be the coolest add-on for any repeater - makes it feel and handle like a specialist Rapid Fire pistol. Right hand medium and large adjustable, and left hand medium now available. Please call for ordering information.

Morini Grip Paste Customize your orthopedic grip - 125ml tin plus hardener.

---

	LP5 & LP50 Trigger We can set any weight you require, from Rapid Air to Bullseye. Roughly 300g to 1.5kg. This trigger unit can be changed in two minutes.
	LP5 & LP50 Magazines Single shot magazine 5 shot magazine Dummy magazine    (for dry fire with expulsion of gas)

	Steyr Pistol Front Sights For all Steyr air pistols. Available in 3.0mm, 4.0mm, 4.5mm and 5.0mm
	Steyr LP2 & LP10 Grip Weight Cast metal 31 gram grip weight. The weight replaces the plastic spacer between grip and frame.

---

Weights for Morini CM162 Series Air Pistols



---

AHG Cleaning Kit for Rifles and Pistols
    

---

TSI301 Lubricant

NOTICE:  TSI301 contains a solvent and is not recommended for use on plastics but ideal for use with metals.

TSI301 is a specially formulated lubricant which sinks into the pores of metal. Very little is required to take advantage of its excellent lubricating properties. Even when the surface of metal appears to be dry, the TSI301 is present, doing its job. It creates a thin film which tends to uproot corrosion or contaminants. It bonds itself to the surface of the metal through physical adsorption reducing surface tension, practically eliminating friction and reducing wear. It does not build up into gummy deposits. Some advantages over other lubricants are: • TSI301 Cleans away rust and contamination better • Low viscosity means superior lubrication efficiency • Penetrates faster • Does not attract dust, dirt or lint • Displaces water better • Increased wear protection • Wider temperature range (-60°F to +450°F) • Reduced residue • Less flash and fire hazard. It has no flash point. It is safe to use near fires and hot metals. • Withstands extreme pressure • Does not conduct electricity (anti-static) • Prevents seizure • Will not stain Available in various sizes


TSI321 Lubricant

NOTICE: TSI 321 does NOT contain a solvent and is highly recommended for use where plastics are present

TSI321 was developed for use by N.A.S.A. in the Apollo Program.  321 is unique because of the extreme temperature range in which it operates as well as its ability to bond with the metal creating a thin film of lubrication without a greasy buildup.  321 is non-electrolytic.  It will prevent metal corrosion and is not harmful to plastics or high alloy metals.  Its unique properties have created a number of unusual applications for it such as camera lubrication and photograph polishing. TSI321 4 oz  squeeze bottle

Super Lube® Grease


Super Lube® Grease is a patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant with PTFE. Synthetic base fluids and the addition of PTFE micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion. Machinery lasts longer, downtime is reduced, and productivity is increased. Super Lube® is compatible with most other lubricants and will not run, drip, evaporate or form gummy deposits, and will not melt or separate. Super Lube® is Food Grade, rated H-1 by the USDA and NSF for incidental food contact. It is an excellent Dielectric and operates over a temperature range from -45° to 450° F.

---

Target Talk Shirts


Hane's red t-shirt with a solid white imprint. Don't forget to specify size.



Postal Address Pilkington Competition Equip. LLC P.O. Box 97 Monteagle, TN 37356

UPS Delivery Address Pilkington Competition Equip. LLC 354 Little Trees Ramble Monteagle, TN 37356

Phone: 931-924-3400 Fax: 931-924-3489 email: info@pilkguns.com

Call via

---

Pilkguns.com©