PilkGuns

 

Rifle Accessories


The World's Best Earmuffs
 

The first I thought when I was handed a set of these was “Quality". Everything about them looked that way. From the well sewn leather headband to the fitting of the attachment arms and thickness of the wires, it all looked first class, MIL SPEC in fact. Putting them on and trying them out was no difference either. I easily adjusted the settings up and down to and could hear footsteps of people walking by on the CARPET. Believe it or not!


Unlike most traditional earmuffs that mute loud noises with a drop in the hearing momentarily, such as gunfire, these maintain the same quiet sound amplification. So it goes up, even when it goes down! I understand the US military is the biggest customer for these for their ability to continue communication, even while firing full auto weapons. We have tested these out around here, and footsteps in the grass can be heard, even conversations in the next room with door closed. Folks know I like Volvos and these MSA headsets come from Sweden as well.

These are not cheap, but you know our slogan “Quality has no regrets” . These definitely fall into that category!

Thanks to well known competitve shooter Don Golembieski, who put us on to these
          http://www.kodiakprecision.com and and another article about him here

The Buttons Middle button is on/off. - and + buttons adjust the sensitivity. It does have an auto off function as well.

Wanna be wired? Includes a 3.5 mm mono jack to input other devices, from communications to music.

Solid machining Notice the battery compartment. Billet aluminum cap with waterproof seal. Uses easily found AAA batteries with a 600 hour expected battery life.

Duncan Device

The Duncan Device is a pellet holder for your offhand stand that lets you arrange the pellets in the shape of your 10 bull target. You can number the stickers in the sequence recommended by your coach to maximize your NPA (Natural Point of Aim). It was developed by nationally recognized youth shooting coach Jack Duncan.  These are cast of green plastic with a wood backing for durability.  Stickers are included for you to number in the arrangement best suited for you.

Special Rifle Shooting Needs

Hill Pumps

Hill High Pressure Hand Pumps
 by Ernest H. Hill, Sheffield, England
since 1841

Hill Air Rifle Pump

                                

200 DIN fitting

200 DIN fitting
Hose fitting

Hose fitting
  • Light and compact, this high pressure pump is the perfect way to become independent of a costly high pressure compressor assembly and SCUBA tank.
  • Patented design which allows filling to 230 BAR.
  • Features safety bleed valve, moisture trap and built-in pressure gauge.
  • The only pump to feature a replaceable filter.
  • Both 200 DIN fitting and hose fitting included. The DIN fitting is suitable for adaptors of all sorts of 10m Match air pistols and rifles like STEYR, MORINI, FEINWERKBAU, ANSCHUTZ, HAMMERLI, WALTHER and many others. The hose fitting, with 1/8 BSP cone seat swivel connector, suits many QD fittings for FT and sporting pre-charged air rifles.
  • ISO 9000 Quality Assured.

Pump Specifications:

LENGTH: 25"

WEIGHT: 7 lb

MAXIMUM PRESSURE: 230 BAR (3300psi)


  • Filling Air Cylinders with a Hand Pump
    • a good article to read


    Replacement filter kit, easy installation.


    Hill Air Rifle Pump with Dry Pac

    The Dry-Pac moisture removal system is another new ground-breaking innovation from Hill. This system answers any lingering concerns about moisture and hand pumps.

    Unique to the market, the Hill Dry-Pac system is a patented method of actively removing moisture utilizing a specially formulated medium and sintered filters. The Dry-Pac moisture elimination kit is available for late model Hill pumps.

    Note: If you purchase a Hill High Pressure Hand Pump and the Hill Dry-Pac system, we will include an extra package of Dry-Pac filter medium.
     

    sac06.jpg - 9885 Bytes Air Pressure Gauge

    Screws into all pistol cylinders, as well as LG1P and LP10P rifle cylinders.


    sac19.jpg - 13572 Bytes

    		 LG100 Filling Adapter

     Please call for ordering information.

    K Valve to DIN Yoke
    K Valve to DIN Yoke

    This is the easiest option for a shooter of a PCP airgun to fill from an existing SCUBA tank set up with a K valve. Fits in seconds. 

     

     


    Steyr Sight Set
    Steyr Match Rifle Sight Set

    As used on LG10, LG100, etc. These are able to be set up for cant, and take standard Anschutz front sight inserts. We have a limited number of these sight sets - new and unused. They will fit Anschutz with minor modification to front sight dovetail (rear slides straight on).

    Please call for ordering information.


    sac20.jpg - 6212 Bytes
    LG100 Riser Block Set

    Includes integral front sight on block.

    Please call for ordering information.

    sac18.jpg - 8091 Bytes
    LG100 Weights

    Stock weight set (3 x 100g)
    100g barrel weight (steel)
    60g shroud weight (aluminum)



    sac10.jpg - 7646 Bytes
    B96 Magazines

    Suits the Steyr LGB1 and Haenel-Suhl B96 Biathlon trainer rifles. 5-shot or single shot.

    Please call for ordering information.

    AHG Cleaning Kit for Rifles and Pistols

        

     

    TSI301 Lubricant



    NOTICE:  TSI301 contains a solvent and is not recommended for use on plastics but ideal for use with metals.

    		 TSI301 is a specially formulated lubricant which sinks into the pores of metal. Very little is required to take advantage of its excellent lubricating properties. Even when the surface of metal appears to be dry, the TSI301 is present, doing its job. It creates a thin film which tends to uproot corrosion or contaminants. It bonds itself to the surface of the metal through physical adsorption reducing surface tension, practically eliminating friction and reducing wear. It does not build up into gummy deposits. Some advantages over other lubricants are:

    • TSI301 Cleans away rust and contamination better
    • Low viscosity means     superior lubrication efficiency
    • Penetrates     faster
    • Does not attract dust, dirt or lint
    •     Displaces water better
    • Increased     wear protection
    • Wider temperature range (-60°F to +450°F)
    • Reduced residue
    • Less flash and fire hazard. It has     no flash point. It is safe to use near fires and hot metals.
    • Withstands extreme pressure
    • Does not conduct electricity (anti-static)
    • Prevents seizure
    •     Will not stain

    Available sizes:
    3 oz aerosol     * cannot be shipped by air
    6 oz aerosol * cannot be shipped by air

    TSI321 Lubricant



    NOTICE: TSI321 does NOT contain a solvent and is highly recommended for use where plastics are present

    TSI321 was developed for use by N.A.S.A. in the Apollo Program.  321 is unique because of the extreme temperature range in which it operates as well as its ability to bond with the metal creating a thin film of lubrication without a greasy buildup.  321 is non-electrolytic.  It will prevent metal corrosion and is not harmful to plastics or high alloy metals.  Its unique properties have created a number of unusual applications for it such as camera lubrication and photograph polishing.

    TSI321 4 oz  squeeze bottle

    footer

    Postal Address
    Pilkington Competition Equip. LLC
    P.O. Box 97
    Monteagle, TN 37356     		UPS Delivery Address
    Pilkington Competition Equip. LLC
    354 Little Trees Ramble
    Monteagle, TN 37356     		Phone: 931-924-3400
    Fax: 931-924-3489
    email: info@pilkguns.com     		Call via

    Pilkguns.com©