Elevation: Clockwise down.
Windage: Clockwise right.
Open fully the armament lever (1) (photo A) and bring it to a semi-closed position. Unscrew the fastening screw on the grip (2) and remove the firing mechanism (photo A). Remove the pin (3) and remove the obturator (photo B).
To assemble the obturator ensure that the firing pin is loaded. To assemble the grip, introduce the sliding plate and stop it by bringing the armament lever in the fully opened position.
Barrel: In vertical direction: loosen the fastening screw on the grip. In horizontal direction: bring the armament lever to the semi-closed position and loosen the screws (4-5-6) (photo A).
Release (photo C): Screw (7) turn in clock-wise direction to decrease the stroke. Screw (8) turn in clock-wise direction to increase it.
Line of aim: By loosing screw (9) (photo D), it is possible to adjust
the sight to the desired distance; by also loosening screw (10), the
supports (11-12) can be rotated on the barrel (photo D) and thus
line of aim (see photos E-F). On request, we supply the centering mark and the sight to adjust the line of aim
as in photo G.
Equipment: Wooden case, 3 counterweights and relative rod, 2 centering aim marks (3.4 – 3.6mm), 1 sight (4.6mm), 1 trigger, 1 hunter pin, 1 screwdriver, 3 hexagonal wrenches.
|Nomenclature [to the explosion drawing]