KORTH REVOLVERS
Sight Adjustments
Target Model
Clockwise down. 1 click = 14mm @ 25m
Clockwise left. 1 full turn = 85mm @ 25m
Combat Model
When making vertical adjustmant first loosen one of the side retaining screws to enable sight to rise of fall. When completed retighten these screws.
Windage is controlled by these two side retaining screws. To move shots to the right, loosen left retain screw and tighten right screw.
Trigger Adjustments
Set into the frame behind the trigger guard is a spring tension bolt which is locked on the right side by means of a slot bolt. To change trigger weight this screw must first be loosened by 1/8 to 1/4 of a turn. You can now adjust trigger weight with the screw on the left side.
Screw clockwise to reduce weight. Be careful not to overadjust; damage can easily be done by turning too far.
Trigger Stop
Trigger stop is located behind trigger shoe.
Removable Cylinder
Cylinder may be removed by swinging it out, pressing button located in the front right of the frame and pulling it towards the front; cylinder will come out with the crane bracket. When replacing press button again and allow the cylinder to come to a rest.