Target models P210-5 and P210-6 have adjustable sights:
Clockwise down - 1 click = 24mm @ 25m.
Clockwise right - 1 click = 13mm @ 25m
Check pistol is unloaded and remove magazine.
Hold pistol in right hand as illustrated. Pull back the slide about 5mm. Simultaneously, with left index finger press in end of slide stop from right side of pistol until it protrudes sufficiently to be removed.
Withdraw entire slide assembly including barrel and recoil spring from the front.
- For models P210-1 or -2;
Remove hammer mechanism from the reciever.
- For models P210-5 or -6;
Unscrew the stop screw for action casing behind the frame. Remove hammer mechanism from the receiver.
Grasp recoil spring rod at rear and extract by pulling it up and back.
Barrel may be removed in the same manner as the recoil spring rod.