STEYR LP10

Sight Adjustments

Elevation: Clockwise down (left hand knob)
Windage: Clockwise left (right hand knob).
1 click = 1.2mm @ 10m

Trigger Adjustments

Trigger Stop Turn clockwise to shorten after travel.
First Stage Weight Turn clockwise to increase first stage weight.
First Stage Travel To reduce first stage travel, first loosen trigger stop screw (turn anti clockwise) a few rotations. Turn clockwise to shorten first stage travel. Afterwards, readjust trigger stop.
Second Stage Trigger Weight Turn clockwise to increase weight.
Sear Engagement The manual warns against adjusting this screw. In extreme cases turning this screw anti clockwise will increase trigger sear engagement.

Grip Adjustment

The grip is adjustable and pivotable in relation to the pistol in all directions. It can therefore be adjusted to most any possible shooting stance and hand position.
To adjust, first remove grip by unscrewing allen screw in base of grip.
Adjustments are made by positioning of countersunk screws located at the bottom and rear of the receiver, as shown in the diagram.